How to Clean a French Drain in Houston, Texas

french drain houston

If you are wondering how to clean a French drain, you may need to look no further than your city’s plumbing department. The city is in charge of keeping Houston’s pipes clean and well maintained. Here is a look at how to clean a French drain Houston in Texas.

Depending on the weather, you can use the city water as a quick fix for a cracked pipe. It is important to understand that water is needed to carry away excess debris and dirt. Also, it should not be used on a severe crack because it could damage it further.

Water can be changed from clean to dirty when in the yard and on the sidewalk. You can also fill a pail with clean water and use it to loosen the soil in the area. If there is no sand or soil in the area, then you will have to buy sand or use the government approved soil stabilizer.

The next time that you are outside, check the area with water. You may find something spongy that can easily be pulled out with tweezers. You can use the same tools to remove the root of the plant as well. Once you have removed the roots and twigs, you can vacuum the area and any other area that may have solidified water.

Before you use the large bag of hose, it is important to make sure that it is covered up by a tarp. This will protect it from moisture. The water should be applied several times to avoid splashing and being knocked off the edge of the hose.

If you don’t work with tools, you can always visit the same office that has been in charge of maintaining your pipes for years. They can make the same repairs for free. Be sure to have a flashlight so that you can see what needs to be repaired properly.

If the drain is one that is located underground, you should cover it with concrete blocks until you can get to it by a ladder. After you have applied the concrete, be sure to let it dry thoroughly before you proceed. You can use a hand-held blowtorch to speed the drying process.

When dealing with a high heat source, you should leave the blocks in place. Never use brooms or shovels to loosen the blocks. Always work on your own after removing the blocks.

As mentioned earlier, you can find drains that have a variety of sizes, shapes, and textures. There are some drains that are simply tied to a pipe or hose. If you are having trouble locating one of these types of drains, you can use a brass or stainless steel cutting tool to scrape off the wax coating. This is done by scraping at the drain with the flat side of the tool.

Don’t sand. Instead, wet the area and then use a compressed air nozzle to blast away the dirt. The dirt that remains should be pulled up and cleaned with a sponge.

Another great tip to remember is to never try to save money on cleaning Houston drains. It will simply ruin your project. This is because there is a limit to the amount of chemicals that you can mix together. It is better to spend the money and get your brain working than to call a plumber because you did not think about it.